数据通信的编码方式论文摘要

数据通信的编码方式论文摘要

问:急求论文摘要翻译!!!
  1. 答:Source coding theory, information theory research as a theoretical basis, has long been widespread concern. Information storage, transmission and other processes often pression. Source coding to remove the signal through the coding redundancy of ponents to achieve pression rate and improve the efficiency munication, the purpose of achieving efficient transmission of signals.
    This article introduces the various areas of munications for language, graphics, video and other data useful source coding techniques. Huffman coding as an example of the source code pression in munication applications, and finally describes the source code for future development trends.
  2. 答:The source coding theory, as the research information theory basis, have been paid much attention to by the people. Information in storage and transmission process often pressed. The source coding pression to remove the source redundancies, achieves pression bitrate, munication efficiency, achieve the purpose of effective transmission signal.
    This paper introduces munication fields for language, graphic, video and other data practical source coding technology. To hoffmann coding for example introduces the source coding in munication, finally pression introduced the application of the source coding the future trend of development.
问:根据通信信道所支持的数据通信类型,常用的数据编码方式分为哪几类?每一类方式又包含哪些编码方法?
  1. 答:根据通信信道所支持的数据通信类型,常用的数据编码方式分为信源编码(压缩编码)、信道编码(纠错编码)、加密编码
  2. 答:释义
    由于移动通信存在干扰和衰落,在信号传输过程中将出现差错,故对数字信号必须采用纠、检错技术,即纠、检错编码技术,以增强数据在信道中传输时抵御各种干扰的能力,提高系统的可靠性。对要在信道中传送的数字信号进行的纠、检错编码就是信道编码。
    通常纠错码分为两大类,即分组码和卷积码。在移动通信系统中另一种纠错方法就是信令重发,解码时先存储再逐位判决,如重发五次,三次或三次以上均为1,则判1。
    信道编码之所以能够检出和校正接收比特流中的差错,是因为加入一些冗余比特,把几个比特上携带的信息扩散到更多的比特上。为此付出的代价是必须传送比该信息所需要的更多的比特。
    发展
    编码定理的证明,从离散信道发展到连续信道,从无记忆信道到有记忆信道,从单用户信道到多用户信道,从证明差错概率可接近于零到以指数规律逼近于零,正在不断完善。编码方法,在离散信道中一般用代数码形式,其类型有较大发展,各种界限也不断有人提出,但尚未达到编码定理所启示的限度,尤其是关于多用户信道,更显得不足。在连续信道中常采用正交函数系来代表消息,这在极限情况下可达到编码定理的限度。不是所有信道的编码定理都已被证明。只有无记忆单用户信道和多用户信道中的特殊情况的编码定理已有严格的证明;其他信道也有一些结果,但尚不完善。
问:通信中常用编码方式有哪些?主要应用哪些场合
  1. 答:总体上有三个大的发展方向:极低速率语音编码、变速率语音编码和不压缩语音编码。
    在可靠性、抗干扰能力、快速交换等方面远胜于模拟化,且灵活方便,易于保密,价格低廉,所以数字化语音在通信系统中所占比重越来越大。
    可以保证很高的语音通信质量和比较简单的通信设备,极大地降低了通信费用。不压缩语音编码主要应用于地面微波通信和光纤通信系统中。
数据通信的编码方式论文摘要
下载Doc文档

猜你喜欢